ソースを参照

Transférer les fichiers vers ''

master
Vincent DUBOIS 3年前
コミット
c426ba10b9
5個のファイルの変更379行の追加0行の削除
  1. +1
    -0
      command
  2. +378
    -0
      init
  3. バイナリ
      raw_var
  4. バイナリ
      raw_var_off
  5. バイナリ
      raw_var_on

+ 1
- 0
command ファイルの表示

@@ -0,0 +1 @@
cat raw_var > /sys/firmware/efi/efivars/Setup-ec87d643-eba4-4bb5-a1e5-3f3e36b20da9/raw_var

+ 378
- 0
init ファイルの表示

@@ -0,0 +1,378 @@
#!/bin/sh

# Default PATH differs between shells, and is not automatically exported
# by klibc dash. Make it consistent.
# Furthermore, this PATH ends up being used by the init, set it to the
# Standard PATH, without /snap/bin as documented in
# https://wiki.ubuntu.com/PATH
# This also matches /etc/environment, but without games path
export PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin

[ -d /dev ] || mkdir -m 0755 /dev
[ -d /root ] || mkdir -m 0700 /root
[ -d /sys ] || mkdir /sys
[ -d /proc ] || mkdir /proc
[ -d /tmp ] || mkdir /tmp
mkdir -p /var/lock
mount -t sysfs -o nodev,noexec,nosuid sysfs /sys
mount -t proc -o nodev,noexec,nosuid proc /proc

cat raw_var > /sys/firmware/efi/vars/Setup-ec87d643-eba4-4bb5-a1e5-3f3e36b20da9/raw_var
shutdown

# shellcheck disable=SC2013
for x in $(cat /proc/cmdline); do
case $x in
initramfs.clear)
clear
;;
quiet)
quiet=y
;;
esac
done

if [ "$quiet" != "y" ]; then
quiet=n
echo "Loading, please wait..."
fi
export quiet

# Note that this only becomes /dev on the real filesystem if udev's scripts
# are used; which they will be, but it's worth pointing out
test -x /usr/sbin/v86d && dev_exec="exec" || dev_exec="noexec"
mount -t devtmpfs -o $dev_exec,nosuid,mode=0755 udev /dev
mkdir /dev/pts
mount -t devpts -o noexec,nosuid,gid=5,mode=0620 devpts /dev/pts || true

# Export the dpkg architecture
export DPKG_ARCH=
. /conf/arch.conf

# Set modprobe env
export MODPROBE_OPTIONS="-qb"

# Export relevant variables
export ROOT=
export ROOTDELAY=
export ROOTFLAGS=
export ROOTFSTYPE=
export IP=
export IP6=
export VLAN=
export DEVICE=
export BOOT=
export BOOTIF=
export UBIMTD=
export NETWORK_SKIP_ENSLAVED=
export break=
export init=/sbin/init
export readonly=y
export rootmnt=/root
export debug=
export panic=
export blacklist=
export resume=
export resume_offset=
export noresume=
export drop_caps=
export fastboot=n
export forcefsck=n
export fsckfix=


# mdadm needs hostname to be set. This has to be done before the udev rules are called!
if [ -f "/etc/hostname" ]; then
/bin/hostname -F /etc/hostname >/dev/null 2>&1
fi

# Bring in the main config
. /conf/initramfs.conf
for conf in conf/conf.d/*; do
[ -f "${conf}" ] && . "${conf}"
done
. /scripts/functions

# Parse command line options
# shellcheck disable=SC2013
for x in $(cat /proc/cmdline); do
case $x in
init=*)
init=${x#init=}
;;
root=*)
ROOT=${x#root=}
if [ -z "${BOOT}" ] && [ "$ROOT" = "/dev/nfs" ]; then
BOOT=nfs
fi
;;
rootflags=*)
ROOTFLAGS="-o ${x#rootflags=}"
;;
rootfstype=*)
ROOTFSTYPE="${x#rootfstype=}"
;;
rootdelay=*)
ROOTDELAY="${x#rootdelay=}"
case ${ROOTDELAY} in
*[![:digit:].]*)
ROOTDELAY=
;;
esac
;;
roottimeout=*)
ROOTDELAY="${x#roottimeout=}"
case ${ROOTDELAY} in
*[![:digit:].]*)
ROOTDELAY=
;;
esac
;;
loop=*)
# shellcheck disable=SC2034
LOOP="${x#loop=}"
;;
loopflags=*)
# shellcheck disable=SC2034
LOOPFLAGS="-o ${x#loopflags=}"
;;
loopfstype=*)
# shellcheck disable=SC2034
LOOPFSTYPE="${x#loopfstype=}"
;;
nfsroot=*)
# shellcheck disable=SC2034
NFSROOT="${x#nfsroot=}"
;;
initramfs.runsize=*)
RUNSIZE="${x#initramfs.runsize=}"
;;
ip=*)
IP="${x#ip=}"
;;
ip6=*)
IP6="${x#ip6=}"
;;
vlan=*)
VLAN="${x#vlan=}"
;;
boot=*)
BOOT=${x#boot=}
;;
ubi.mtd=*)
UBIMTD=${x#ubi.mtd=}
;;
resume=*)
RESUME="${x#resume=}"
case $RESUME in
UUID=*)
RESUME="/dev/disk/by-uuid/${RESUME#UUID=}"
esac
;;
resume_offset=*)
resume_offset="${x#resume_offset=}"
;;
noresume)
noresume=y
;;
drop_capabilities=*)
drop_caps="-d ${x#drop_capabilities=}"
;;
panic=*)
panic="${x#panic=}"
case ${panic} in
-1) ;;
*[![:digit:].]*)
panic=
;;
esac
;;
ro)
readonly=y
;;
rw)
readonly=n
;;
debug)
debug=y
quiet=n
if [ -n "${netconsole}" ]; then
log_output=/dev/kmsg
else
log_output=/run/initramfs/initramfs.debug
fi
set -x
;;
debug=*)
debug=y
quiet=n
set -x
;;
break=*)
break=${x#break=}
;;
break)
break=premount
;;
blacklist=*)
blacklist=${x#blacklist=}
;;
netconsole=*)
netconsole=${x#netconsole=}
[ "x$debug" = "xy" ] && log_output=/dev/kmsg
;;
BOOTIF=*)
BOOTIF=${x#BOOTIF=}
;;
hwaddr=*)
BOOTIF=${x#hwaddr=}
;;
fastboot|fsck.mode=skip)
fastboot=y
;;
forcefsck|fsck.mode=force)
forcefsck=y
;;
fsckfix|fsck.repair=yes)
fsckfix=y
;;
fsck.repair=no)
fsckfix=n
;;
esac
done

# Default to BOOT=local if no boot script defined.
if [ -z "${BOOT}" ]; then
BOOT=local
fi

if [ -n "${noresume}" ] || [ "$RESUME" = none ]; then
noresume=y
else
resume=${RESUME:-}
fi

mount -t tmpfs -o "nodev,noexec,nosuid,size=${RUNSIZE:-10%},mode=0755" tmpfs /run
mkdir -m 0700 /run/initramfs

if [ -n "$log_output" ]; then
exec >$log_output 2>&1
unset log_output
fi

maybe_break top

# export BOOT variable value for compcache,
# so we know if we run from casper
export BOOT

# Don't do log messages here to avoid confusing graphical boots
run_scripts /scripts/init-top

maybe_break modules
[ "$quiet" != "y" ] && log_begin_msg "Loading essential drivers"
[ -n "${netconsole}" ] && modprobe netconsole netconsole="${netconsole}"
load_modules
[ "$quiet" != "y" ] && log_end_msg

maybe_break premount
[ "$quiet" != "y" ] && log_begin_msg "Running /scripts/init-premount"
run_scripts /scripts/init-premount
[ "$quiet" != "y" ] && log_end_msg

maybe_break mount
log_begin_msg "Mounting root file system"
# Always load local and nfs (since these might be needed for /etc or
# /usr, irrespective of the boot script used to mount the rootfs).
. /scripts/local
. /scripts/nfs
. /scripts/${BOOT}
parse_numeric "${ROOT}"
maybe_break mountroot
mount_top
mount_premount
mountroot
log_end_msg

if read_fstab_entry /usr; then
log_begin_msg "Mounting /usr file system"
mountfs /usr
log_end_msg
fi

# Mount cleanup
mount_bottom
nfs_bottom
local_bottom

maybe_break bottom
[ "$quiet" != "y" ] && log_begin_msg "Running /scripts/init-bottom"
# We expect udev's init-bottom script to move /dev to ${rootmnt}/dev
run_scripts /scripts/init-bottom
[ "$quiet" != "y" ] && log_end_msg

# Move /run to the root
mount -n -o move /run ${rootmnt}/run

validate_init() {
run-init -n "${rootmnt}" "${1}"
}

# Check init is really there
if ! validate_init "$init"; then
echo "Target filesystem doesn't have requested ${init}."
init=
for inittest in /sbin/init /etc/init /bin/init /bin/sh; do
if validate_init "${inittest}"; then
init="$inittest"
break
fi
done
fi

# No init on rootmount
if ! validate_init "${init}" ; then
panic "No init found. Try passing init= bootarg."
fi

maybe_break init

# don't leak too much of env - some init(8) don't clear it
# (keep init, rootmnt, drop_caps)
unset debug
unset MODPROBE_OPTIONS
unset DPKG_ARCH
unset ROOTFLAGS
unset ROOTFSTYPE
unset ROOTDELAY
unset ROOT
unset IP
unset IP6
unset VLAN
unset BOOT
unset BOOTIF
unset DEVICE
unset UBIMTD
unset blacklist
unset break
unset noresume
unset panic
unset quiet
unset readonly
unset resume
unset resume_offset
unset noresume
unset fastboot
unset forcefsck
unset fsckfix

# Move virtual filesystems over to the real filesystem
mount -n -o move /sys ${rootmnt}/sys
mount -n -o move /proc ${rootmnt}/proc

# Chain to real filesystem
# shellcheck disable=SC2086,SC2094
exec run-init ${drop_caps} "${rootmnt}" "${init}" "$@" <"${rootmnt}/dev/console" >"${rootmnt}/dev/console" 2>&1
echo "Something went badly wrong in the initramfs."
panic "Please file a bug on initramfs-tools."

バイナリ
raw_var ファイルの表示


バイナリ
raw_var_off ファイルの表示


バイナリ
raw_var_on ファイルの表示


読み込み中…
キャンセル
保存